Target Operator Shift Report

This is a procedure for making the Shift Report:

Start an ECL Elog Post and title the subject <Date>  <Shift> Target Operator Shift Report.

Values are located in System Monitoring and most can be found searching these parameters or with these presets.
The ~ separates and points to where the value can be found either on a display,  presets, or inside parameters.

Tips:

For QT system look for Manifolds PT8.

For cryo flow look for Magnet return and MagRetBypass Opening.

For cryo level look for Run Valve and Bypass Valve.

for cryo magnet look for output current.

The Liquefier valves are above the magnet dewar in the display.

Check the weather here.

Insert and fill out the entry text following this format:

Shift Leader:

Target System Mode:

Beginning of Shift: <Shift>

~ Cryo Pressure ~

IVC:

~ preset Target TV ~

Liquefier A Status:
Liquefier A Liquid He level:
Liquefier B Status:
Liquefier B Liquid He level:

~ Liquefier  Display: Valves ~

VPC Status: Open
VJVT Status: closed
VJVA Status: closed
VJVB Status: closed

~ preset Target TV ~

Magnet LHe Level: 58.025054 L

Magnet LN2 Level: 86.4 %

Purifier LN2 Level: 83.52904%

~ QT Systems ~
Outside gHe tank pressure: 83.52904 psi

~ Cryo Flow  ~

Magnet Return Bypass Valve: 5.00%
Gate Valve Bypass: 0.237 turns

~ Cryo Level ~
Fridge Valves:
Run valve = 2.000 turns
Bypass valve = Closed

~ Cryo Magnet ~

Magnet Current: 0 Amps

~ NMR Display ~

Mode: take-data
TE measurement: No

~ Microwave Display ~
Microwave frequency: 0 MHz
Number of "Recovery Sequence" made: No

~ Lifter Display ~
Target Lifter Position: Anneal

~ Alarm Handler ~
Active alarms are good with no warnings.

~ Weather ~
Weather is 86 degrees. Partly cloudy.

~ Check ~
All strip charts and monitors are operational.