You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

If the magnet is already in the "persistent mode", then the VI should look like the following picture.


Steps to move the magnet current from 74.51 A to 74 A

  1. Select the option from the "Presets" field.
  2. Press the "To Set" button and wait until the "Output current (A)" increases up to 74.51 A. It will take about 5 mins, and once the output current reaches 74.51 A, it will be automatically switched back to the "Hold".
  3. Press the toggle button
  4. SS
  • No labels