...
In the above picture, click on the GV Bypass on point 1 to open the VI to control the GV Bypass.
Click on Point 2 to disable the auto control with pressure. or leave it on Auto Control with pressure, please check with Target Expert.
If it needs to be on Auto Control with Pressure then skip the following step.
You can manually change the set point on point 3 by entering 0.25 and pressing Enter, or you can manually Change the set point on point 4 by entering 100 and pressing Enter.
4. Open the Run Valve at 3 turns.
In the above picture, click on point 1, Fridge Valve, to open the VI.
Insert manually the number of turns that you want to open the Run valve and press Enter.
5. Once, the liquid level reached at Heat-Ex Bottom or what level that you want to fill then fully close the Run valve by inserting 0 turns and press Enter.
