• Created by Anonymous, last modified by Unknown User (za2hd) on May 17, 2021

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Here are the things that we sent to FermiLab on July, 2019:

  1. Pfeiffer Vacuum, TurboMolecular pump TMU 1001P with electronic control unit TC600
  2. Turbomolecular pump controller: Pfeiffer Vacuum DCU 600 with serial RS-485
  3. Pfeiffer Vacuum, pressure sensor PKR 361
  4. Readout/Controller for the pfeiffer PKR 361: Pfeiffer TPG 361
  5. Pfeiffer Vacuum, backing pump for the Turbo: ACP 15 ES25S
  6. American Magnetic Inc, Model 1700 liquid level controller
  7. MKS Baratron 690A 1000 transducer: One 1000 Torr and two 100 Torr
  8. LANL Flow meter: Teledyne hasting
  9. MKS Signal Conditioner Model 670 (Quantity:2)
  10. Stepper motor, Applied Motion Product: 5000-126 STS 5 (Quantity:2)
  11. Target Stick
  12. Noses (Quantity:2). One has a big window.
  13. U-tube
  14. BK precision power supply model 1627A 
  15. MKS Baratron 220BHS


Here are the things that we sent to FermiLab on July 25, 2019:

  1. Lakeshore 218s serial no. 210020
  2. Storage dewer, cryo fab. serial no 022624, top color: blue
  3. NMR line, semi rigid cable, BA50085
  4. Gore cable (blue), huber + suhner inc, around 0.5 m
  5. nalgene plastic bottle, 1 pack
  6. Torque wrench, CDI torque product, 0-30 In. Lb, 6-6245992707-1
  7. Cutter


Here are the things that we sent to Fermilab on Sept 10:

  1. Flange, 4 inch 304, VNE Taiwan, 1004135
  2. Target stick lifter
  3. 3 adapter fitting and 7 target lids (in one small plastic)
  4. 10 pieces of → TE Connectivity, 1050859-1, QTY 1, 1701 Mexico
  5. 1 connector → PE45135 1807
  6. 8 pieces of SMA connector → 11 SMA 50-2-15/111 544545
  7. 3 pieces connector → 1054874-1; 2084-1100-00; 200211694846; 15406; usz26
  8. 1 Spin physics proceeding 2008 conference book

Here are the thing we sent to Fermilab on October 2:

  1. Two raisers in the magnet dewars


Sent to Fermilab on January 2021

 Some devices that we purchased before holiday for the remote control:
 8-port Ethernet switches (2)

 Ethernet cables
 USB-Ethernet converter
 RS232-Ethernet converter

 Devices related to Microwave setup:
 Microwave-remote control cable with the sticker E155 on it (DB25 connection)
 Alpha-roll cable (Red) 18AWG 100ft
 Alpha-roll cable (Black) 18AWG 100ft
 tinned copper tubular bride alpha (Grey) 100ft
 Microwave-remote panel Varian VJW2838
 DB15 connector shorted
 Waveguide (5)
 Microwave gauge (Star-shaped sticker)

 Others:
 Teledyne Hasting Readout THCD408
 Teledyne flow sensor HFM-305
 Teledyne flowmeter pinout H HFC-303
 Flexible PVC Tubing 100ft
 2 wooden blocks (to layout the target insert)
 Oscilloscope Tektronix TDS3032
 2 rolls of shielded wire (22 AWG) with DB15 M/F connection (approximately 50ft)
 Stepper motor (Oriental motor) Vexta
 MKS Baratron Pressure sensor 1000 Torr (cylinder)
 Stepper Motor driver (Applied motion) (2)
 Hasting Mass Flowmeter (readout) with the sticker Separator Flow on it (from Teledyne Hasting Raydist)
 Hasting Flowmeter/Alarm (readout) (From Teledyne Hasting Raydist)
 Motor (applied motion) with "Bypass" written on it
 Swagelok valve (3)
 Omega extension wire cable (blue)
 Pfeiffer vacuum Valve D-35614 Asslar
 cable with fischer connection in one end and DB25- DB25 Male in the other end (approximately 1 meter)
 AWM cable style 20276 (~ 2 meter)
 Brush (Maxman)
 Iron Clamps (10)
 Valve from Key High Vacuum Product Model SA-100-K-N

 Shipping back to Fermilab (It sent to Fermilab then shipped back to UVA for LabView purposes):
 Pfeiffer vacuum Pressure sensor (PKR361) including the read out (TPG361)
 MKS Baratron 1000 Torr including the Read out (MKS670)


  • No labels