Versions Compared

Old Version 7

changes.mady.by.user Kenichi Nakano

Saved on

compared with

New Version Current

changes.mady.by.user Kenichi Nakano

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CCP Main Panel

"CCP_Main.vi" is the Main panel of CCP.

It is to start/stop all subsystems under CCP and overview the key readings from them.

CCP Sub Panels

Each subsystem (~controllor) has its own panel (=CCP sub panel) for detailed monitoring and control.

A sub panel can be opened by clicking the "Open" button of corresponding controller on the Main panel.

Spill Counter

The Spill Counter is not a part of CCP but an important program which counts the spill signals from the accelerator and assign spill IDsID.

It should be launched at the top right corner of the target computer display.

Handling of

...

Problems/Alarms

  • The "Status" of a sub panel is "Black" on the CCP Main Panel, i.e. the sub panel is not running:  Image Added
    1. Click the "Start All Subsys" button on the CCP Main Panel.
    2. If the "Status" doesn't become Green, try step 1 again.  If it doesn't help, call the target expert.
  • The "Status" of a sub panel is "Red" on the CCP Main Panel, i.e. the sub panel has an error:  Image Added
    1. Click the "Open" button on the CCP Main Panel.  A sub panel should pop up.
    2. Click the "Stop" button on the sub panel.
    3. Click the "Start All Subsys" button on the Main (not Sub) Panel.
    4. If the "Status" doesn't become Green, try steps 2-3 again.  If it doesn't help, call the target expert.

How to Restart Sub Panel

  1. Click the "Stop" button of the sub panel.
    1. If it doesn't stop, you might have to terminate the LabVIEW process via the Windows Task Manager.
  2. Click "Start All Subsys" () on "CCP_Main.vi".
    1. You should not click the "Run" button of the sub panel, because the sub panel will (sometimes) stop once its window is closed.

...

  1. Click the desktop icon "CCP_Main.vi" ().  It opens the window of "CCP_Main.vi".
  2. Click the "Run" button () of "CCP_Main.vi".
  3. Click "Start All Subsys" () on "CCP_Main.vi".
  4. Enable software controls as needed.  All software controls are disabled when the CCP is opened.  Software controls are usually enabled in the following subsystems marked with "Auto":
  5. MagRetBypass_Main.vi
  6. Fridge_Valve_Main.vi
    7. GV_Bypass_Main.vi Image Added

x