Fridge Valve Panel in CCP

You can open the Panel for the Fridge Valves (Fridge_Valve_Main.vi) by clicking the "Open" button for "Fridge Valve" (Image Modified) on the CCP Main Panel (CCP_Main.vi).
Interface for control and monitoring
- Run valve = Right middle section of the Fridge Valve Panel.
- Bypass valve = Right bottom section.
The number of valve turns is used to specify the opening of valves.
- Fully closed = 0 turns
- Fully opened = 3 turns

Image Modified

How to Move Run or Bypass Valve

...

If you enter a wrong set point, you might press the "Stop Move" button () to stop the valve motion.
The set point of valve turns are limited by software from -0.5 to 3.0 turns, where the negative turns are used when expert calibrates the valve position.
If you make the set point out of this range If you set the valve turn out of the valid range (0-3 turns) somehow, please contact the target expert immediately. In principle the set point is limited to the valid range by software (VI).