...
| CCP Main Panel |
| "CCP_Main.vi" is the Main panel of CCP. It is to start/stop all subsystems under CCP and overview the key readings from them. |
| CCP Sub Panels |
| Each subsystem (~controllor) has its own panel (=CCP sub panel) for detailed monitoring and control. A sub panel can be opened by clicking the "Open" button of corresponding controller on the Main panel. |
| Spill Counter |
| The Spill Counter is not a part of CCP but an important program which counts the spill signals from the accelerator and assign spill ID. It should be launched at the top right corner of the target computer display. |
Handling of Problems/Alarms
...
- The "Status" of a sub panel is "Black" on the CCP Main Panel, i.e. the sub panel is not running:
- Click the "Start All Subsys" button on the CCP Main Panel.
- If the "Status" doesn't become Green, call the target expert.
- The "Status" of a sub panel is "Red" on the CCP Main Panel, i.e. the sub panel has an error:
- Click the "Open" button on the CCP Main Panel. A sub panel should pop up.
- Click the "Stop" button on the sub panel.
- Click the "Start All Subsys" button on the Main (not Sub) Panel.
- If the "Status" doesn't become Green, call the target expert.
How to Restart Sub Panel
- Click the "Stop" button of the sub panel.
- If it doesn't stop, you might have to terminate the LabVIEW process via the Windows Task Manager.
- Click "Start All Subsys" (
) on "CCP_Main.vi".- You should not click the "Run" button of the sub panel, because the sub panel will (sometimes) stop once its window is closed.
...