The ITS Team will be performing maintenance on Confluence beginning at 6:00 pm Tuesday, May 6. During this time the service may go offline. It should be available again by 8:00 pm. Please refrain from editing pages during this time to avoid losing your work.
New Page: https://github.com/uva-spin
GitHub pages:
https://github.com/UVA-LabVIEW-Projects/LabVIEW-Projects
https://github.com/E1039-Collaboration/e1039-target-controls
LabView Vi's & associated information
Instrument | Hardware | Vi avail. | GitHub location(s) | Assignment | Test Status | Install in the target computer | |
---|---|---|---|---|---|---|---|
1 | Magnet flow control (THCD) | In-progress | Zulkaida/Harsha/Misha | How about "*_forhere.vi". Final setup?? MKS 946 and MKS 670 are included? | |||
2 | Separator flow control (THCD) | In-progress | Zulkaida/Harsha/Misha | ||||
3 | Fridge flow monitor (THCD) | In-progress | Zulkaida/Harsha/Misha | ||||
4 | Fridge nose level probe | AMI1700 | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Cryo-Control | Zulkaida | ||
5 | Run valve | In-progress | Harsha | ||||
6 | Bypass valve | In-progress | Harsha | ||||
7 | High Accuracy Signal Conditioner: MKS 670B | For pressure sensor (MKS 690A) | Step #2 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MKS_670_VIs | Kenichi (& Zulkaida) | ||
8 | Vacuum System Controller: MKS 946 | For pressure sensor (MKS 722B) * 2 | Step #4 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MKS_946_VIs | Kenichi (& Zulkaida) | ||
9 | DAQ for MCC E-TC for | Sensor type: Omega SA1 RTD | In-progress | Need to check the plan with Waqar | Waqar? (Kenichi) | ||
t.b.n. | DAQ for Thermocouple: MCC E-TC | Sensor: Omega Type T, at target cave | In-progress | https://github.com/UVA-LabVIEW-Projects/LabVIEW-Projects/tree/main/Delcaor%20(Complete) | Kenichi?, Reggie? | ||
10 | LakeShore218 (8 channels) | yes | Reggie | Error on target computer: Missing VIs: SQL Execute.vi, ADO Connection Create.vi, ADO Connection Open.vi, ADO Connection Destroy.vi. | |||
11 | LakeShore218 (Target Insert) | yes | Reggie | ||||
12 | Target Lifter | In-progress | Vibodha | ||||
13 | Basic Microwave motor controller | In-progress | Vibodha | ||||
14 | EIP Frequency counter | In-progress | https://github.com/uva-spin/e1039-target-controls/tree/master/Motor%20controller | Vibodha | |||
15 | Magnet OVC | Pfeifer Vacuum | yes | Zulkaida | |||
18 | Magnet PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control | Zulkaida/David | |||
19 | Shim PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control | Zulkaida/David | |||
20 | Mercury iTM | yes | Misha | ||||
21 | Mercury iTC | N2 level | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control | Zulkaida | ||
22 | Maxigauge | yes | https://github.com/UVA-LabVIEW-Projects/LabVIEW-Projects/tree/main/Maxigauge%20VIs | Zulkaida | |||
23 | EV105-N (Electronic valve) | Fairchite TA6000-104 | no (one Vi) | Zulkaida | |||
24 | EV102-N (Electronic valve) | Asco 8222G 002LT | no (one Vi) | Zulkaida | |||
25 | TE107-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | |||
26 | TE108-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | |||
27 | PT106-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida | |||
28 | PT110-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida |
Steps of VI Availability (Tentative)
- A few simple VIs for readout and configuration. It is to confirm that the device can be controlled with LabVIEW.
- A complete set of VIs for readout and configuration. Each VI should perform one function of the device.
- VIs for user interface.
- VIs for continuous measurement.
- VIs for continuous logging.
- Note that an integrated user interface (like PDP) for all the devices that we use will be considered in a future. We could use DQMH or CML DQMH.
Updates
Date | Title | Presenter | File |
---|---|---|---|
| Update on LN2 Bos | Vibodha | SCMeetig_August25.pptx |
| Zulkaida |