Excerpt |
---|
This guide helps you create a collaborative, student-crowdsourced timeline in Mandala Visuals. Image AddedJohn Alexander used this timeline for his course the course he co-taught with Walt Heinecke "Documenting UVaUVA's FuturesFuture." This course, inspired by the ouster and reinstatement of UVa UVA President Teresa Sullivan, documented the event using oral histories. Since many students were not in Charlottesville for the ouster, John Alexander helped them make a collaborative timeline of the proceedings in class, which included links to primary sources. This helped them understand the flow of information surrounding the ouster. Afterward, he shared the timeline with his students, so that they could reference it throughout the semester. Image Removed To make a crowdsourced timeline: - Create a Google Spreadsheet
Enter your data - Format your spreadsheet
- Log in
|
...
...
In this guide, Google and the Google logo are registered trademarks of Google Inc., used with permission.1. Create a Google Spreadsheet
Visuals pulls data from your Google account to make visualizations. To start making a timeline, put your data into Google Sheets.
First, go to docs drive.google.com. You'll see the Google log in page.
...
Log in with your Netbadge credentials. You'll see the University of Virginia Google Drive page (or the standard Google Drive page if you entered a non-UVa UVA address).
Section |
---|
Column |
---|
| ![Google and the Google logo are registered trademarks of Google Inc., used with permission. Google and the Google logo are registered trademarks of Google Inc., used with permission.](/download/attachments/14140591/New_Sheet.png?version=1&modificationDate=1501773924000&api=v2&effects=drop-shadow)
|
Column |
---|
| Click New, then Google Sheets to make your new spreadsheet. |
|
Section |
---|
Column |
---|
| ![Google and the Google logo are registered trademarks of Google Inc., used with permission. Google and the Google logo are registered trademarks of Google Inc., used with permission.](/download/attachments/14140591/spread_sheet_title.png?version=1&modificationDate=1501773925000&api=v2&effects=drop-shadow)
|
Column |
---|
| This is where you will enter your data. Before you start that process, however, you should make your spreadsheet accessible to Audio-Video. To do this, click Share in the top right corner. Make sure to title your spreadsheet if you have not done so. |
|
Section |
---|
Column |
---|
| ![Google and the Google logo are registered trademarks of Google Inc., used with permission. Google and the Google logo are registered trademarks of Google Inc., used with permission.](/download/attachments/14140591/link_share.png?version=1&modificationDate=1501773923000&api=v2&effects=drop-shadow)
|
Column |
---|
Then, Get shareable link. This automatically turns on link sharing. |
|
...
The default setting restricts sharing to UVA viewers. We need to make a few more changes so anyone with a link can access your data. If you're not using a UVA standard "@gmail.com" Google Drive Accountaccount, simply change Anyone at with the link can view to can edit. Then you can skip ahead to the next section. If you're using a UVA-affiliated account, continue reading.
Section |
---|
Column |
---|
| ![Google and the Google logo are registered trademarks of Google Inc., used with permission. Google and the Google logo are registered trademarks of Google Inc., used with permission.](/download/attachments/14140591/link_share_expand.png?version=1&modificationDate=1501773924000&api=v2&effects=drop-shadow)
|
Column |
---|
First, click Anyone at UVa with the link can view. You'll see extra options. Click More to see all privacy options. |
|
Section |
---|
Column |
---|
| ![Google and the Google logo are registered trademarks of Google Inc., used with permission. Google and the Google logo are registered trademarks of Google Inc., used with permission.](/download/attachments/14140591/link_share_all.png?version=1&modificationDate=1501773923000&api=v2&effects=drop-shadow)
|
Column |
---|
Choose On - Anyone with the link, then Savethen make sure "Access" is set to Can edit. Then, you can Save these settings. Click Done to finish adjusting privacy settings. |
|
...
Here, we're making a simple spreadsheet.
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| Enter all labels you need on the top row of the spreadsheet. These are: - title
- description
- startdate
- link
|
|
You'll leave the rows themselves blank. In class, each student will add a row to the spreadsheet, creating a single event. Before they can do that, however, you should make sure rows are formatted correctly.
3. Format your spreadsheetThe Timeline reference guide has specific data types for each column. Luckily, our example is easy: every column should be in the "plain text" data type.
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| To set the data type, select your column. Click Format from the menu, then Number. Choose Plain Text. Do this for each column. |
|
Now your spreadsheet is ready for student contributions. Next, you can move to Mandala Audio-Video to set up the basic visualization before class begins.
4. Log in to VisualsGo to Visuals at https://visuals.shanti.virginia.edu.
Section |
---|
Column |
---|
| Image Added
|
Column |
---|
| Click on the Main Menu |
|
...
icon ( Image Modified ) in the top right corner. Then, Log in via Netbadge. |
|
Enter your Netbadge credentials to finish logging in. Now we'll make your visualization.
...
5. Create your timeline
...
Make sure to log in before making your timeline. Then:
Section |
---|
Column |
---|
| Image Added |
Column |
---|
| Click Image Added> Collections > Create. A list of visualization types will open. |
|
Section |
---|
Column |
---|
| ![](/download/attachments/14140591/make_timeline.png?version=1&modificationDate=1501773927000&api=v2&effects=drop-shadow)
|
Column |
---|
Choose Relationships, then Create under "Timeline." |
|
You'll see the visualization editor and a preview of your timeline. Now we need to add your spreadsheet to the editor.
Section |
---|
Column |
---|
| Image Added
|
Column |
---|
| Find the "Source of events" field and click on the |
|
...
triangle Google Drive icon |
|
...
You'll see a list of your Google Drive accounts. Log If prompted, log in to the account that holds your data spreadsheet. Google Google will ask if you give Shanti permission to see your files: click Allow. You may not have to do the last two steps: you might see your Google Drive files directly.
click Allow. You'll see a Google Drive window in Visuals with a list of your files.
...
Since your students fill in the events, you won't see any information on the timeline. You might also notice that the range of times in the window doesn't suit your needs. You want the timeline to show all your student's events at first view.
Section |
---|
Column |
---|
| Image Removed Image Added |
Column |
---|
| First, set "Center date of timeline." In our case, we checked UVA Magazine's timeline of the ouster and realized that events happened in a window between June 8, 2012 and June 29, 2012. Therefore, we centered the timeline on June 18, 2012. Since according to the visualization index you use a DD/MM/Year format for "Center date of timeline," we entered 18/06/2012. |
|
...
We can adjust this scope using "Initial zoom of timeline." Since the value of this field is tricky to determine, we'll create two reference events for the "beginning" and "end" points of our timeline, then adjust the value of "Initial zoom."
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
First, go back to the spreadsheet. We're going to create two events – one with a start date of June 8, 2012 and one with a start date of June 29, 2012. We'll call the first event "start" and the second event "end." Don't worry about names too much – these are temporary reference points, and we'll delete them at the end. Use the DD/MM/Year format for the dates. |
|
Now go back to the visualizations editor. Adjust the "Initial zoom of timeline" by small increments, increasing the value to zoom out, decreasing the value to zoom in, until you can see the "start" and "end" events at the opposite ends of the timeline.
Section |
---|
Column |
---|
| Image Removed Image Added |
Column |
---|
| Here are the values we ended up with. Notice we also had to adjust "Center date of timeline" by a few days. |
|
Notice the text "start" and "end" are a bit large. Remember, you're going to have to have students recording many events on this timeline. To set the size of the font, we're going to make a column called "importance."
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
Enter "importance" in the first row of column E, then give all rows in the column a value of 20. |
|
Section |
---|
Column |
---|
| Image Removed Image Added |
Column |
---|
| Now "hide" the column to prevent your students from worrying about this value. Visuals can still read data in hidden columns. To hide column E, select the entire column, then right click on it and choose Hide from the menu. |
|
Section |
---|
Column |
---|
| Image Removed Image Added |
Column |
---|
| This is the hidden column. To unhide this data, click on the two arrows (< >) between columns D and F. |
|
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| When you go back to your visualization, you'll see "start" and "end" are now smaller. |
|
...
The timeline still isn't very informative, however – how will viewers understand the significance of events? Let's make the visualization show a description of the event, which your students enter in column B of your spreadsheet.
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
To do this, change Show the description from false to true. Now when a viewer clicks on an event, a description will pop up. In the example, we've also entered the "Title of timeline." |
|
...
Switch the status of the timeline from Draft to Published at the top of the page. Then, Save your visualization. You're all ready for your class to create a collaborative timeline together.
...
6. Invite student contributions in classFor the class, you should have a way to project your visualization. Once you've set up the projector, you can open your visualization by logging into Visuals, then:
Section |
---|
Column |
---|
| Image Added |
Column |
---|
| Click Image Added> My Content > My Visualizations. You'll see a list of all your visualizations. Click on your timeline to open it. |
|
Before the class, ask your students to bring:
...
Share the timeline spreadsheet with your students. To do this, you should use the URL of the spreadsheet at Share > Copy Link in Google Sheets. If you've followed the spreadsheet setup process correctly, all your students need is the URL of the document to edit it.
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| In class, you can ask each of your students to add their event in a new row of the spreadsheet, like so. |
|
You'll see the timeline grow gradually, giving your students a sense of how information flows through time.
You can make this timeline available to your students after class in UVaCollab.
...
7. Add the timeline to UVaCollabOpen Now, we'll add the timeline your students created together to UVaCollab. This lets them reference the data throughout the semester. To begin, open your class site in UVaCollab.
Section |
---|
Column |
---|
| Image Removed Image Added |
Column |
---|
| Go to Resources in the sidebar. |
|
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| Find the folder where you want to add the timeline. Next to the folder's name, click Actions, then Create HTML Page. An editing tool will open. |
|
Now you need to fetch your timeline from Visuals. To do this, open the visualization, then click the Share icon (
).
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
| From the window that opens, click iFrame. This tab contains HTML code that will let you embed your timeline directly into the new UVaCollab HTML page. Copy the code and return to UVaCollab. |
|
To insert the code into the page, you need to switch the UVaCollab editor mode to edit HTML.
Section |
---|
Column |
---|
| Image Removed Image Added
|
Column |
---|
To do so, click Sources in the editor toolbar. |
|
Section |
---|
Column |
---|
| Image Added |
Column |
---|
| Paste the iFrame code into the editor, then Continue. |
|
You'll see a form with metadata fields, where you can add a title and restrict access to your HTML page. Fill out the fields as needed, then Finish. The new page will appear under the Resources. If you click on the site, you'll see the interactive timeline your students created collaboratively.
This code also lets you add the visualization to a WordPress course site. Follow the Add an iFrame guide for help.
Now you're finished with your project. To learn more about making visualizations, you can use this Visuals in Mandala guide.
...