Page History

...

• Lifter mechanical setup

  Qty	Description	Manufacturer	Part number
  7	Limit switch	Honeywell	311SM6-T
  2	String Potentiometer	TE connectivity	PT1A-15-UP-10K-C25
  1	stepper motor	Applied Motion Products, Inc.	HT23-600
  2	Right-Angle Gear Drive	Andantex USA
  2	Screw Jack	Duff-Norton

  The seven(7) position switches are labeled as in the following image. The Upper Limit and the Lower Limit are 
  Image Removed
  Image Added

  • The limit switches are connected to the motor driver in the Lifter Control Box.
  • The IP address of the driver: 192.168.24.142
  • The motor driver is configured to a special configuration (Lifter config_Updated.stfprj) for the lifter operation. The configuration is done by the manufacturer's software STF Configurator Setup 2.0.22.0630(AMP).exe 
  • The following image shows the STF interface after configuring the driver
    Image Added
  • The configuration is only needed when replacing the motor driver with a new driver

• Lifter Control box

The attached ORC document describes the details of the lifter control box ORC-1865_ORC_Lifter Control System.pdf

...