This page is just to keep old information that was originally written in the Ongoing Tasks about Target Software page.

Photos of pressure sensors

ItemLocationNotes
9

Already installed
8

Pipe fitting: KF-40

Sensor fitting: 4-VCR Female

Flex hose (needed because the gas port of the sensor must not be directed upward)

KF40 to KF16 converter : https://locoscience.com/products/kf40-to-kf16-flanges-vacuum-fitting-conical-reducer-adapter

KF16 flex hose: https://locoscience.com/products/kf16-flexible-vacuum-bellow-1000mm?_pos=1&_sid=63838aa66&_ss=r
KF16 to 4-VCR male : https://www.idealvac.com/Adapter-KF-16-to-4-VCR-Male/pp/P101374 



5

Pipe fitting: KF-16

Sensor fitting: 4-VCR Female

Adapter: KF-16 to 4-VCR Male

https://www.idealvac.com/Adapter-KF-16-to-4-VCR-Male/pp/P101374

Location: towards upside of the white piping (see the left image)

1 & 2

Pipe fitting:

1000Torr (~ $ 470)

KF16 to 1/2" swagelok
https://www.idealvac.com/Adapter-KF-16-to-12-in-Swagelok/pp/P102086
1/2" OD SS  ($ 270: 20ft)
1/2" to 1/4" reducer: https://products.swagelok.com/en/c/straights/p/SS-400-R-8
1/4" to 4-VCR connector : https://products.swagelok.com/en/c/straights/p/SS-4-VCR-6-400



3This is He Vapor pressure sensor (MKS 615)Waiting for piping
6 & 7



6) Separator line from cave should be connected to:   
    i) Pressure sensor (Need a Tee reducer KF25, KF16)
   ii) Mass Flow Controller (in and out are KF25)

Tee: https://locoscience.com/products/3-way-tee-kf25-flange-vacuum-fitting
Reducer to sensor: https://locoscience.com/products/kf25-to-kf16-flange-conical-reducer-vacuum-adapter

7) LHe vapor line from Magnet Dewar should be connected to:
   i) Pressure sensor: Need to identify the converter, need a Tee reducer KF25, KF16
 ii) Mass Flor Meter Controller

Adapter: https://locoscience.com/products/kf25-flange-to-1-npt-male-vacuum-fitting-adapter
Tee: https://locoscience.com/products/3-way-tee-kf25-flange-vacuum-fitting
Reducer to sensor: https://locoscience.com/products/kf25-to-kf16-flange-conical-reducer-vacuum-adapter

flex hose: https://www.amazon.com/ISO-KF-Corrugated-Bellow-Aluminum-Centering/dp/B09QGWGM2W (Qty 4)
MFC (this is KF25)
flex hose from MFC
Reducer KF40 to KF25
https://locoscience.com/products/kf40-kf25-flange-vacuum-fitting-reducer-adapter

Also, need a count of various converters we already have.
KF25-KF16, KF16-KF40, KF25-KF40



Fermilab Tech will help us install this one
10 & 11



LANL sensors. Check with Misha
4 (AUX)

MKS 722B (cylinder silver) seen in the photo has been moved to the roots pump area for #5.

TPR 280 will be place for #4 (AUX).  We need a longer cable.


LabView Vi's & associated information


InstrumentHardware                            Vi   avail.GitHub location(s)                                                                                                                                          Assignment     Test StatusTested on target computer?Notes
1,2,3

Flow control (HFC) for magnet,

Flow control (HFC) for separator,

(Main) flow monitor (HFM) for fridge

THCD-400In-progress

Cryo Control Panel

Standalone: Temperature-Pressure-VIs/THCD_400_VIs


Kenichi

Misha         


Yes
4

Fridge nose level probe

AMI1700yes

Cryo Control Panel

Kenichi
Yes
5

Run valve


In-progress

Cryo Control Panel

Kenichi
Yes
6

Bypass valve


In-progressCryo Control PanelKenichi
Yes
7

High Accuracy Signal Conditioner: MKS 670B

For pressure sensor (MKS 690A)Step #2

Cryo Control Panel

Standalone: Temperature-Pressure-VIs/MKS_670_VIs

Kenichi

Zulkaida


Yes
8

Vacuum System Controller: MKS 946

For pressure sensor (MKS 722B) * 2Step #5

Cryo Control Panel

Standalone: Temperature-Pressure-VIs/MKS_946_VIs

Kenichi

Kenichi


Yes
9.1

DAQ for MCC E-TC for
annealing

Sensor: 

Type-T TC * 2

In-progressSame as #9.2Kenichi


9.2DAQ for Thermocouple: MCC E-TCSensor: Omega Type T, at target caveStep #5

https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MCC_ETC_VIs

Kenichi


10

LakeShore218  (8 channels)


In-progress
Reggie


Yes
11

LakeShore218 (Target Insert)
2 + (6: can be used for other)


In-progress
Reggie
Yes
12

Target Lifter


In-progress
Vibodha


13

Basic Microwave motor controller
& potentiometer


In-progress
Vibodha


14

EIP Frequency counter


In-progress

https://github.com/uva-spin/e1039-target-controls/tree/master/Motor%20controller

Vibodha


15Magnet OVCPfeifer Vacuumyes
Zulkaida


18

Magnet PS


yeshttps://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control
Magnet Power Supply Operation
Zulkaida/David


19

Shim PS


yeshttps://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control
Magnet Power Supply Operation
Zulkaida/David


20Mercury iTM
yes
Misha


21

Mercury iTC

N2 levelyeshttps://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-ControlZulkaida


22

MaxiGauge

TPR 280 * 5yes

Cryo Control Panel

Standalone: Test-VIs/MaxiGaugeTesting

Kenichi

Zulkaida




23

EV105-N (Electronic valve)

Fairchite     TA6000-104

no (one Vi)
Zulkaida


24

EV102-N (Electronic valve)

Asco 8222G 002LT

no (one Vi)
Zulkaida


25

TE107-N (Temp. Sensor)

OmegaSA1 RTD

no (one Vi)
Zulkaida


26

TE108-N (Temp. Sensor)

OmegaSA1 RTD

no (one Vi)
Zulkaida


27

PT106-N (Pressure Sensor)

DWIER 626-11-GH-P1-E4-S1

no (one Vi)
Zulkaida


28

PT110-N (Pressure Sensor)

DWIER 626-11-GH-P1-E4-S1

no (one Vi)
Zulkaida


29TPG361Pfeiffer VacuumNeed testinghttps://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/TPG361_Version2Zulkaida


a

  • No labels