The ITS Team will be performing maintenance on Confluence beginning at 6:00 pm Tuesday, December 3, 2024 . During this time the service may go offline. It should be available again by 8:00 pm. Please refrain from editing pages during this time to avoid losing your work.
Turn-Off/On Procedure
Procedure for turning off and on the slow control rack, in case of planned/unplanned power outage.
Turning Off
- Make sure all programs related to the magnet rack are stopped.
- Record which devices are on (and off).
- Turn off the magnet PS, using its front panel.
- Unplug the two power cords (for 100 V and 200 V) of the magnet rack.
Turning On
- Plug the two power cords of the magnet rack.
Enable the output of the 24-V PS by pushing its center circular button. It is for the roots-pump LCW flow meter and the gas analyzer.- Turn on the magnet PS by pushing its power button. It might turn on by itself.
- Switch the relay for the magnet shim heaters to OFF using Magnet_PS_Main.vi, if necessary.
Trouble Shooting
n/a