The latest information should be found in this Google Spreadsheet.

Flow Controller/Monitor

9	Pfeiffer PKR 361	1	Attached to dewar	Pfeiffer TPG 361	Slow-control rack	Target computer
8	MKS 722B #1	1	Return manifold	MKS 946 #1, ch. 1	Slow-control rack	Target computer
5	MKS 722B #2	1	Main return line, after roots pump	MKS 946 #1, ch. 2	ditto	ditto
1	MKS 690 #1 (100 Torr)	1	Fridge via flex hose	MKS 670 #1	Slow-control rack	Target computer
2	MKS 690 #2 (1000 Torr)	1	Neat MKS 690 100 Torr	MKS 670 #2	Slow-control rack	Target computer
3	MKS 615	1	He3 pressure probe	MKS 670 #3	Slow-control rack	Target computer
6	Pfeiffer TPR280	1	Separator return line, near return manifold	Maxigauge # 1, ch. 3	Magnet Rack	Target computer	To be replaced with APR250
7	Pfeiffer TPR280	1	Magnet return line, near return manifold	Maxigauge # 1, ch. 4	Magnet Rack	Target computer	To be replaced with APR250
x	Pfeiffer APR250	1	Main return line, near return manifold	Maxigauge # 1, ch. 5	Magnet Rack	Target computer	To be replaced with another sensor
10	Pfeiffer TPR280	1	Roots pump, LANL	Maxigauge # 1, ch. 1	Magnet Rack	Target computer
11	Pfeiffer TPR280	1	Roots pump, LANL	Maxigauge # 1, ch. 2	Magnet Rack	Target computer

Drawing about sensor locations: https://docs.google.com/drawings/d/1GqKY_9TjaVcJRM2lM2pf_QPTJEXJiqYSX4lqnYAeNM0/edit
- Old version: https://docs.google.com/drawings/d/1c_QUxwmyqHE4M3oXTLWR50RxG7F-Zl6y2h9EEIfEYPY/edit
For the annealing system we should have the analogue setup be entirely independent of the other system, this will require 4 sensors. Two for the Waqar system and 2 for the Henery system, if possible.
All other, ~20 sensors should be setup with the same type of DAQ that Kenichi is testing unless we determine it is not suitable regarding temperature dependent error. The error budgets are different for several of these, but Magnet coils is by far the most critical low relative error requirement. So, if it looks like this setup will work there it will work everywhere.

Vishay Chip 1K OHM	8	Inside of Fridge	No	Not sure	LakeShore 218 #1	Slow-control rack	Yes?	Target computer
6 Vishay Chip 1 K OHM + 2 cernox	8	Target Insert	no	Not sure	LakeShore 218 #2	Slow-control rack	Yes?	Target computer
Type-T TC	8	Magnet coils	Yes	Yes	MCC E-TC #1	Slow-control rack	Yes	Target computer
Type-T TC	3	LHe QT fill line (2 vacuum layer, 1 on stinger)	Yes	Yes	MCC E-TC #2	Slow-control rack	Yes	Target computer
Type-T TC	2	Magnet IVC	Yes	Yes	MCC E-TC #2	ditto	ditto	ditto
Type-T TC	1	Separator line	Yes	Yes	MCC E-TC #2	ditto	ditto	ditto
Type-T TC	1	Top seal of fridge	Yes	Yes	MCC E-TC #2	ditto	ditto	ditto
Type-T TC	2	Microwave cooling (1 on EIO, 1 on cooling water)	Yes	Yes	MCC E-TC #3	Slow-control rack	Yes	Target computer
Type-T TC	2	Fridge for Waqar's manual annealing system	Yes	Yes	MCC E-TC #3	ditto	ditto	ditto
Type-T TC	2	Fridge for Henery's automated annealing system	No	No	Arduino??	Annealing Panel	No	??
Type-K TC	10	Surface of 10 cold heads	Yes	Yes	LabJack U3-LV	Slow-control rack	Yes	Target computer