The magnet return flow is remotely controlled by two paths, but currently, only the 'Magnet Return Bypass' path with its VI is used.
On CCP, click the "Magnet return bypass valve" button.
Operational Options
1. Pressure PID mode (see the screenshot below)
Ensure the pressure (in psig) that you want to PID is entered in the "Set Point" box, and then press the toggle button "Auto Control with PTMR3" to enable the pressure PID.
2. Flow PID mode (see the screenshot below)
Ensure the flow (in SLM) that you want to PID is entered in the "Set Point" box, and then press the toggle button "Auto Control with Flow" to enable the flow PID.
3. Fully Open mode (see the screenshot below)
