Hardware
Part Description | URL(s) | Notes |
|---|---|---|
| Ladish Flange, Gasket, and Clamps | To order: https://www.janis.com/Products/AccessoriesandAncillaryEquipment/CryogenicAccessories.aspx Additional Resource: https://www.toplineonline.com/products/fittings-clamps/clamps/clamps-13is-heavy-duty-clamp/ | Use chart on Janis website to determine proper component nominal size based on the actual component size. For example, the Ladish flange on the fridge has an actual diameter of ~4.68in so the nominal size of the flange, gasket, and clamp is 4". |
Omega KH-303/5-P Flexible Heater for annealing plates | To order: https://www.omega.com/pptst/KHR_KHLV_KH.html | On component page, use Omega's 'Part Number Builder' to locate proper heater and place order. |
| Vishay 1K Ohm Resistor for Liquid Helium level detection | To order: Datasheet: http://www.vishay.com/docs/31011/rcwp.pdf | |
| LakeShore WQT-36 Quad-Twist Cryogenic Wire | Datasheet and to order: https://www.lakeshore.com/Documents/LSTC_wire_l.pdf | 36 AWG |
| Adjustable Friction Clutch | To order: https://www.ondrivesus.com/adjustable-friction-clutches-4mm-x-4mm-bores-p-27090.html Datasheet: https://www.ondrivesus.com/documents/products/couplings-clutches-shaft-273-281-311-403-411.pdf | Part Number: 311.16.1818 Clutches for the run/bypass valve stepper motors |
| Helium Level Stepper Motors | Motor: https://www.applied-motion.com/products/stepper-motors/ht17-278 Controller: https://www.applied-motion.com/products/stepper-drives/st5-s Controller Manual: https://www.applied-motion.com/sites/default/files/hardware-manuals/ST5-10-S_C_HardwareManual__920-0027_RevD-opt-.pdf | Run/bypass valve stepper motors |