This page is to overview the SpinQuest software installed on Rivanna.  Details and specific usages of each component are described in its README.md or web page.

System-Level Files

All system-level files are located under "/project/ptgroup/spinquest".  You can activate them on text terminal by sourcing "this-e1039.sh";

The components follow the standard SpinQuest package hierarchy; namely "e1039-resource", "e1039-share" and "e1039-core".

Development of e1039-core

You are recommended to use "spinquestgpvm01.fnal.gov" to develop "e1039-core" since the E1039 environment at Rivanna has been set up for normal use (=analysis) at present.  But you can make your own version of e1039-core at Rivanna, by executing the following commands.

DIR_INST=~/e1039/core-inst
mkdir -p $DIR_INST
cd ~/e1039
git clone https://github.com/E1039-Collaboration/e1039-core.git
cd e1039-core
cp -p script/this-core-org.sh $DIR_INST/this-core.sh
source /project/ptgroup/spinquest/this-e1039.sh
export ROOT_INCLUDE_PATH=$ROOT_INCLUDE_PATH_E1039_SHARE
source $DIR_INST/this-core.sh
./build.sh

Once the commands go fine, you can modify the source code and build it again by "./build.sh -r simulation/g4detectors" for example, where "simulation/g4detectors" should be the first package that you modified.

When you

• Build the source code in new shell (=text terminal), or
• Execute analysis macro (such as "e1039-analysis/SimChainDev"),

you have to execute the "source" and "export" commands;

E1039_CORE_DIR=~/e1039/core-inst
source /project/ptgroup/spinquest/this-e1039.sh

It is probably easier for you to make a setup script (like "setup.sh") to execute the commands.

User-Level Files

User-level files for the SpinQuest MC event generation are located under "/project/ptgroup/Akbar", such as "DY_Target_script". 

The standard set of SpinQuest analysis packages are available in "e1039-analysis.  The user-level files uses a mofidied version of "e1039-analysis" complied under "/project/ptgroup/spinquest/e1039-analysis/module".

Development Version

A newer version of the SpinQuest software has been set up on Rivanna.  It is to make use of version 10.07 of Geant4.  "e1039-share" and "e1039-core" has been modified to be built successfully.  Details of the modifications and the installation procedure can be found in the scripts under "/project/ptgroup/spinquest/devel/script".

You can activate this version on text terminal by sourcing "this-e1039.sh";

The analysis modules for the MC event generation (i.e. "AnaTrkQA" and "AnaTrkQAv2") have been complied and are available under "devel/".