CABLING Table:
| Analog Board | Digitizer | type of cable | comments |
|---|---|---|---|
| L- |
| tank (ext tuner) | ---- | Semi-rigid |
| Tuner→ Crystal box | |||
RF IN (tuner) | --- | SMB | Generator→ Tuner |
IF OFF | DAC A | SMB | |
| Tune |
| DAC B | SMB |
Ribbon cable:
WIP
Crystal Box:
| to V-tune of ext tuner | |||
Phase | DAC C | SMB | |
Log OFF | DAC D | SMB | |
IF HI | ADC 0-1 | SMB | |
IF LO | ADC 2-3 | SMB | |
Log LO | ADC 4-5 | SMB | |
Log HI | ADC 6-7 | SMB | |
| DAQ ethernet | switch |
Plugging the Ribbon cable :
Digitizer:
Analog board:
RCLK pin 2 goes to Brown cable.
Crystal Box:
External Tuner Board connected to crystal:
Vtune goes to the Crystal Box, use semi-rigid cable. cable length needs to be determined later:
WIP
Preliminary Settings
1.Turn on router and switch (Turn on monitor)
...