Page History

...

1. Stop and close the following VIs.
   1. Cryo Control Panel (CCP_Main.vi) — Click the "Stop All Subsys" button and then , click the "Stop This Panel" button.
   2. BOS+EOS Handler — Follow the detailed procedure written below.
2. Shut down the OS.
3. Ask the SpinQuest network admin to shut down the following SpinQuest servers.
   1. e1039scrun — Use SSH and the "poweroff" command
   2. e906-gat1, e1039gat1 — Use SSH and "poweroff"
   3. e906-db1 — Use SSH and "poweroff"
   4. SeaQuestDsk0 (/data2) — Long-press the hardware power button until the power goes off

Turning On

1. 1. , and then close the front-panel window.
   2. Spill Counter (Spill_Counter_Main.vi) — Click the "STOP" button, and then close the front-panel window.
   3. Close the LabVIEW startup window.
2. Shut down the OS.

Turning On

1. Confirm with the NM4 network admin that the NM4 Make sure that the following Sea/SpinQuest servers are up and running.  If not, contact the network admin or boot them up if allowed.
   1. SeaQuestDsk0, e906-db1 — Wait until SeaQuestDsk0 becomes up.
   2. e906-gat1, e1039gat1
   3. e1039scrun
2. Make sure that the slow-control rack and the magnet rack are up and running.
3. Boot up the OS.
4. Login as "e1039daq".  Only the UVA members know the password.
5. Click "SX Virtual Link" in the taskbar to open it.  It connects to all remote USB devices automatically.
6. Start the following VIs.
   1. BOS+EOS Handler — Follow the detailed procedure written belowSpill Counter — Double-click "Spill_Counter_Main.vi" on the desktop and click the VI "Run" icon.
   2. Cryo Control Panel — Double-click "CCP_Main.vi" on the desktop and click the VI "Run" icon.

...