Page History

...

1. Stop and close the following VIs.
   1. Cryo Control Panel — Click the "Stop All Subsys" button and then the "Stop This" button.
   2. BOS+EOS Handler — See Follow the detailed procedure written below.
2. Shut down the OS.
3. Ask the SpinQuest network admin to shut down the following SpinQuest servers.
   1. e1039scrun — Use SSH and the "poweroff" command
   2. e906-gat1, e1039gat1 — Use SSH and "poweroff"
   3. e906-db1 — Use SSH and "poweroff"
   4. SeaQuestDsk0 (/data2) — Long-press the hardware power button until the power goes off

...

1. Make sure that the following Sea/SpinQuest servers are up and running.  If not, contact the network admin or boot them up if allowed.
   
   1. SeaQuestDsk0, e906-db1 — Wait until SeaQuestDsk0 becomes up.
   2. e906-gat1, e1039gat1
   3. e1039scrun
2. Make sure that the slow-control rack and the magnet rack are up and running.
3. Boot up the OS.
4. Login as "e1039daq".  Only the UVA members know the password.
5. Click "SX Virtual Link" in the taskbar to open it.  It connects to all remote USB devices automatically.
6. Start the following VIs.
   1. BOS+EOS Handler — See Follow the detailed procedure written below.
   2. Cryo Control Panel — Double-click "CCP_Main.vi" on the desktop and click the VI "Run" icon.

...