Confluence may be unavailable from 17:30 on January 8th through 23:00 January 8th for upgrading hardware on our NetApp storage system. During this time the service may go offline. Please refrain from editing pages during this time to avoid losing your work.
For further information on the outage please visit the outage titled: Storage - Premium - nasUDC FAS9500 controller upgrade. Thank you for your patience as we complete this important work.
...
| Do Immediately | Additional Information |
|---|---|
Fridge sensors | 1KOhm Ruthenium Oxide |
| Determine and measure true path for all cables coming from target cave and order all cable needed | Front Penetration → Racks on Cryo platform → Counting House Side Penetration → Racks on Cryo platform → Counting House |
| Liquid Helium Level Probe mounting clips | Being made at UVa - 7/17/19 |
| Replace Black BUNA-N O-rings | Measure existing O-rings and find PTFE (Teflon) equivalents
|
| Make and test indium seal on shell/nose | |
| Buy a flaring tool for copper tubing | |
| Assemble and test microwave system | Needs to be shipped from UVa - 7/17/19 Borrow gore cable from UVa Need waveguide too |
| Get Liverpool NMR Q-meter (and ancillary equipment) from LANL | |
| Once EIO arrives, connect EIP and test air core cable | |
| Setup sensors on stick | Check with lakeshore |
| Stink test in the target loading area | with "special" spray |
| Setup and test manometer | |
| Setup external magnet sensors | |
| Shim Microwave actuator bushings for hard stop and top target |
...
