Please keep a running tab of all things to do in the foreseeable future. Lets keep things moving and make the most of our time at Fermilab. Anyone can add tasks here. Once a task is complete please remove it from the list here and my an entry in the ECL logbook about that task being complete.
The top mounting plate can be positioned whenever the techs come to do it. The machining and materials from UVA have arrived and are ready. This includes the bottom target tri-winged frame and the new aluminum feet holders. The threaded feet are also finished from FNAL. The dowel pins should be done soon. After this the lifter frame should go in and then the magnet can in principle go into position. In order for us to be ready for that we want new PTFE seals which are more radiation resistant. We need to clean and prep the magnet and can, and to do the dock survey.
(See below for survey info)
| Do Immediately | Additional Information |
|---|---|
Fridge sensors | 1KOhm Ruthenium Oxide |
| Determine and measure true path for all cables coming from target cave and order all cable needed | Front Penetration → Racks on Cryo platform → Counting House Side Penetration → Racks on Cryo platform → Counting House |
| Replace Black BUNA-N O-rings | Measure existing O-rings and find PTFE (Teflon) equivalents
|
| After replacing seals setup safety walk through with | Setup Operational Readiness Clearance (through Rick) |
| Buy a flaring tool for copper tubing | |
| Assemble and test microwave system | Needs to be shipped from UVa - 7/17/19 Borrow gore cable from UVa Need waveguide too |
| Get Liverpool NMR Q-meter (and ancillary equipment) from LANL | |
| Once EIO arrives, connect EIP and test air core cable | |
| Setup sensors on stick | Check with lakeshore |
| Stink test in the target loading area | with "special" spray |
| Setup and test manometer | |
| Setup external magnet sensors with data going into slow controls data stream | |
| Shim Microwave actuator bushings for hard stop and top target. Microwave table and magnet should be in place and use the information from initial survey to measure |
...