Print this checklist and have it with you while proceeding with the following steps:View file name Magnet_LHe_Fill_Checklist.docx height 250 View file name Magnet_LHe_Fill_Checklist.pdf height 250
Preparation:
- Check the outside gHe pressure and make sure it is below 90 psi. If it's equal, near, or above, then relieve its pressure down to ~80 psi.
- Check with Target Expert on Shift whether the REGX green hand valve is fixed to some pressure during the previous fill.
- Connect to the Cryo Control Computer (via VNC: see Polarized Target System for SpinQuest at FNAL for the instructions)
...